Comprehensive Guide to Fix TP Link Extender Red Light Issue
If you want to extend your existing WiFi network, the TP-Link range extender is the right option to consider. However, there are instances when users complain about seeing the blinking red LED on their TP-Link extenders. Are you also facing the TP Link extender red light issue? Well, if so, walking through the troubleshooting hacks mentioned in this post will surely bear some fruit. Thus, scroll down and read on.
(Resolved) TP Link Extender Red Light Issue
1. Reboot Your TP-Link Extender
You know what they say, ‘If a technical device doesn’t work properly, try switching it off and on’. Perhaps, this is exactly what you need to do in order to get rid of the TP Link extender red light issue.
Follow the instructions mentioned below and learn how to give your device a restart
- Disconnect your TP-Link extender from your home router.
- Power off your extender and unplug it from the wall socket it is plugged into.
- Wait for some time.
- Plug your extender back into its wall outlet and power it on.
- Do not forget to reconnect your TP-Link extender to your home router.
Note: Whether you have performed TP Link AC750 setup or configured any other extender model at home, this process will remain the same for all.
2. Verify the Power Supply
Check whether your TP-Link wireless range extender is getting an adequate power supply from its wall socket. If not, it’s probably because the outlet is damaged.
To troubleshoot the issue, either get your wall socket repaired or consider plugging your WiFi device into a different one.
3. Check the Ethernet Connection
Chances are that the Ethernet cable connecting your TP-Link wireless range extender and your home router is damaged due to which the LED on your device is not turning green.
Therefore, replace the Ethernet cable with a new one. Feeling a little lazy to do that? Well, in that case, connect your devices with the help of a wireless source.
4. Bring Your WiFi Devices Closer
Another common reason behind getting the TP Link extender red light issue could be the improper distance between your extender and the host router.
Thus, unplug your extender from the wall socket it is currently plugged into and plug it into the one located near your home router.
5. Contact Your ISP
If you are still having trouble with the TP Link extender red light issue, get in touch with your Internet Service Provider.
He’ll be able to tell you if there is an internet outage, interference, or any other issue outside your control. If the issue is not in your control, ask your ISP to get it fixed for you.
6. Perform TP-Link Firmware Upgrade
Updating the firmware of your extender to the latest version can also help you get rid of the TP Link extender red light issue. Thus, follow the guidelines outlined below and learn how to perform TP Link firmware upgrade:
- Switch on your PC and launch an internet browser.
- Download the latest firmware version for your extender.
- Open a new tab on your browser and access tplinkrepeater.net.
- Once you are on the official login window, enter the default admin details.
- Click the Log In button.
- On the Quick Setup wizard, click the Settings option.
- Select System Tools > Firmware Upgrade.
- Click the Browse button and upload the firmware file.
- In some time, the firmware of your extender will get updated to the latest version.
Note: If you are not comfortable with the manual method to update your device, it is recommended that you opt for the TP Link app.
7. Reset Your TP-Link Extender
Last but not least, performing factory default reset can also help you resolve the TP Link extender red light issue.
So, take the help of the following steps and learn how to reset your wireless device:
- Locate the Reset button on your TP Link range extender.
- Press it carefully.
- Hold on for some time.
If even after resetting and reconfiguring your device, you are struggling with the TP Link extender red light issue, it’s high time that you reach out to our technical experts.