Full Guide to Fix TP Link Extender Not Showing Up in WiFi Issue
Are you frustrated that the network of your TP Link range extender is not appearing in your computer’s network list? If you answered “yes,” then you should know that your suffering is about to stop. But before we get into it, it’s important that you understand what’s causing the TP Link extender login not showing up in WiFi issue. If you understand what caused the problem, you’ll have a leg up on finding a solution.
- Slow internet connection
- Unfortunately, your device’s firmware is out of date
- The range of the extender is too far from the router
- You haven’t completed the setup procedure correctly
Now that you know what may be causing the TP Link Wifi extender not showing up in WiFi issue, you can go on with TP Link troubleshooting.
[Resolved] TP Link Extender Not Showing Up in WiFi Issue
Gain Access to a Strong Internet Connection
As mentioned above, one of the most typical causes of the TP Link extender not showing up in WiFi issue is poor internet. This may seem apparent, but it’s the case very often.
Make sure you’re accessing a lightning-fast internet connection so you can fix this problem right away. The next step is to contact your ISP if the problem persists.
Perform TP Link Firmware Update
Have you ever forgotten to update your mobile device or computer and experienced buffering or other strange behavior? If you have, then you’d know that there’s another explanation for why you are facing the TP Link extender not showing up in WiFi issue.
Don’t worry, however, since we are here to assist you in fixing the problem. To upgrade the firmware on your TP Link WiFi extender by accessing the page, just follow the simple steps provided below:
- If you haven’t done so before, turn on your computer.
- Open your preferred web browser.
- To access your network’s settings, go to the tplinkrepeater.net setup page.
- After you’ve signed into your device successfully, go to the Settings menu.
- Go to the section labeled “Administration.”
- To check for firmware updates, select the Firmware Update button.
- Simply choose your WiFi extender model.
- You may get the file by clicking here.
- Upload the file as soon as it has been downloaded.
- Please be patient for a few minutes.
Within some time, your TP Link wireless extender will get updated to its latest version.
Place Your WiFi Devices at a Safe Distance
If your home router and the TP Link extender are permanently attached to one other, you need to separate them. If you don’t, your hope of having your extender listed with your other networks will stay just a dream.
Both devices should be somewhat near to one another, but not so close that their WiFi signals interfere with one another. That’s why you need to keep some space between your TP Link router and extender.
Perform TP Link Extender Setup Again
You put those three suggestions to use but you’re still having trouble? Your failure to correctly configure your device seems to be costing you. But don’t fret. It’s imperative that you take extra care while setting up your TP Link range extender via TP Link app. Consider the following recommendations as well:
- Check the TP Link user manual for the default username and password of your extender.
- The TP Link setup procedure may be executed using the right web address.
- Distance your extender from potential signal disruptors such as metal objects, reflexive surfaces, and appliances as they can interfere with its signals.
Need More Help?
If you’re still experiencing the TP Link extender not showing up in WiFi issue after going through the hacks given above, then perhaps it is time that you may reach out to our skilled professionals whenever you want. You may count on them to provide some useful help.