These are some of the most common issues faced by TP-Link repeater users. If you are reading this guide, surely you are experiencing one of these issues too. But, don’t go nuts yet because our technical experts are here to assist you. Here, we have talked about various TP Link troubleshooting hacks through which you can get rid of every issue that you’re facing with your device
A firmware is a software embedded in every TP-Link repeater. It controls the overall functionality of your wireless device. Also, it helps you get rid of bugs and errors.
In order to keep the performance of your repeater to its peak, you need to ensure that its firmware is getting updated from time to time. However, if you come across the TP Link firmware update failure issue every time you try to update your device, you’re in trouble! But, worry not! Take a glance at the troubleshooting tips mentioned below and learn how to get rid of the TP Link firmware update failure issue:
Once you done walking through these TP Link troubleshooting tips, try to perform TP Link firmware update. If you are still not able to, waste no more time, and get in touch with our technical experts. They will surely be able to assist you.
Another godforsaken issue that users come across is tplinkrepeater.net not working. Tplinkrepeater.net is a gateway that enables you to tweak the settings of your TP Link wireless repeater. So, if you are unable to go across this gateway, you are no doubt in a mess.
But, the good news is that we are here to help you out! We have explained some of the topmost TP Link troubleshooting steps through which fixing the tplinkrepeater.net not working issue will be a piece of cake for you.
a) Use the Correct Web Address.
One of the biggest reasons why you are not able to access tplinkrepeater.net page is because you haven’t used the correct web address. Well, it’s a mistake that is often made. And considering it’s a mistake, it can be rectified.
So, the next time you try to log in to your TP Link wireless repeater, ensure that the web address you are using is correct. Also, keep in mind that you are typing the web address in the address bar of the web browser instead of the search bar.
b)Update Web Browser
If your web browser is not updated to the latest version, then also you can experience the tplinkrepeater.net not working issue.
To troubleshoot the issue, access the Settings menu of the web browser you are using, and update it. Once done, try to access tplinkrepeater.net.
c)Disable VPN or Proxy
Sometimes enabled VPN or proxy can also disable you from accessing tplinkrepeater.net. Therefore, temporarily disable the VPN on your device.
If following none of the aforementioned tips helped you get rid of the tplinkrepeater.net not working issue, reboot your TP-Link wireless repeater. Trust us, that will work wonders for you!
d) Reboot Your TP Link Repeater
Here is how you can reboot your TP Link wireless repeater:
Now, switch on your device, launch a web browser, and try to access tplinkrepeater.net.
Although the above-mentioned TP Link troubleshooting steps will help you iron out the tplinkrepeater.net not working issue, on the off chance it doesn’t, feel free to reach out to our technical experts. They are always on the ball to help you out!
Check the Power Supply
Start by checking whether your TP-Link wireless repeater is getting an adequate power supply from the wall outlet or not. If not, that might be because of two reasons:
Therefore, make sure that you get the wall outlet fixed and replace your existing power cable with a new one.
Opt for an Ethernet Connection
Perhaps the connection between your TP-Link wireless range repeater and the router is unstable. That might be because you’ve connected your devices wirelessly. To rectify the issue, use an Ethernet cable to connect your devices
Bring Your WiFi Devices Closer
If the distance between your TP-Link wireless extender and router is too much, that too can disable your extender from working properly. Thus, make sure that your devices are placed in close proximity. But, avoid placing your extender and router too close. Their WiFi signals might clash otherwise.
Perform TP Link Firmware Update
Make sure that the firmware of your extender is updated. If it isn’t, take the help of the below-mentioned tips to follow the steps mentioned below:
Note: It is suggested that you back up your current Settings before getting any further with the TP Link firmware update process. To back up your settings, click System Tools > Backup & Restore, and click Save to make your changes effective.
As soon as you are done updating the firmware of your repeater, check whether you are still experiencing the TP Link repeater not working issue.
Reset Your TP Link Repeater
If it has come to this point, then it means that your TP Link repeater TP Link repeater is in no mood of behaving. But, don’t bust out your brain yet! Performing factory default reset will surely help you get rid of the TP Link repeater not working issue.
Here’s how you can reset your WiFi device:
After resetting your device, perform TP-Link repeater setup from scratch. Not sure about the instructions? No problem! What are we here for? Contact our well-versed experts right away and get assistance on how to set up a TP Link repeater.
Disclaimer: We at tplinkrepeater.cc provide online support and information for issues with TP Link WiFi devices. However, we are not involved with any particular organization or brand. The use of trademarks, brand names or logos used on the site should be considered only as for reference purpose. We provide run-time assistance to customers who directly approach us.