If you want to get your hands on an extender that expands bandwidth and enables more simultaneous transmissions at the fastest possible speeds, then the TP-Link BE9300 tri-band Wi-Fi 7 range extender is your best bet. This extender has powerful antennas that boost your WiFi coverage and provide rock-solid signals. Apart from this, it sends and receives data across bands as well as channels to increase throughput, improve reliability, and reduce latency. At last, it works with different EASYMESH routers to form a seamless whole home Mesh WiFi. In case after reading this introduction, you are convinced that this is the device you would like to set up, then continue reading this blog post.
For achieving TP-Link BE9300 setup success using the WPS method, it is important that the router, as well as the extender both, have the WPS button located on them.
In case the LED located on the host router does not blink, then it is recommended that you push the WPS button located on it again. The same tip applies to the extender.
Now, change the location of the extender place it where you want to extend the wireless network coverage, and enjoy an extended and seamless wireless network.
There is no need to repeat the setup process now. Every single time when you will plug it into a wall socket, it will connect automatically.
In this method, ensure that whatever web browser you use is not running on its updated version but is also clean from browsing history, cookies, and cache.
In case you do not want to connect your devices via an Ethernet cable, then the same can be done with the aid of a wireless source of connection.
Once your device has saved all the settings that you have changed, it will automatically reboot. It is recommended that you give it some time to get rebooted properly.
Do not interrupt the process by unplugging your TP-Link BE9300 Wi-Fi 7 range extender from its wall socket or turning it off for that matter.
As you read in the introduction of this blog post, the TP-Link BE9300 tri-band Wi-Fi 7 range extender is a device giving a try because of the various specifications. We hope that after following the information, you will easily be able to configure the networking device either using the WPS method or the manual method.
In case none of the aforementioned methods seemed easy enough for you to use, then see if the device can be installed via the TP Link app. To learn about the same, refer to the info given in the user manual of your range extender. You might have received it when you went to purchase the networking device.
Disclaimer: We at tplinkrepeater.cc provide online support and information for issues with TP Link WiFi devices. However, we are not involved with any particular organization or brand. The use of trademarks, brand names or logos used on the site should be considered only as for reference purpose. We provide run-time assistance to customers who directly approach us.