This particular blog post will teach you how to use your own router for Verizon FIOS service in a matter of minutes. Connecting my own router with Verizon FIOS will let you skip that pesky/ annoying router rental fee while giving you more control over your WiFi network. On the off chance, you have FIOS internet service without a smart TV, then you can easily swap routers without hindrance. However, if your Verizon FIOS service includes TV (s) as well, you will have one additional expense. And, for this, you may need a MoCA adapter in order to keep using internet TV services without any issue.
Now, without waiting much, let’s provide you the tips for using your own router for Verizon FIOS. Given that, continue reading.
Given below are the tips required to use your router for Verizon FIOS. Keep scrolling down!
First things first, you need to find out how your router is connected to the Optical Network Terminal aka ONT. On the off chance, your Verizon router has an Ethernet cable connected to its WAN or the internet port and the port’s light is on, then it means you are all set. But, if the router is connected to the ONT with a coaxial (cable TV) cable but not via Ethernet, you will have to perform a few more steps.
In case you are already connected via Ethernet, then you are free to skip this step. If are not using the one, refer to the following steps to switch to Ethernet:
First and foremost, you need to find the ONT in your home. Well, it is suppose to be in a white or silver box along with the Verizon logo. On the other hand, it could be mounted on the outside of the house closer to your telephone box.
Thereafter, you need to find the Ethernet port. Where to find the Ethernet port? The port is usually near to the green LED lights on the bottom panel of the unit.
Do you have TV service through Verizon FIOS? If yes, then switching to a new router will prevent internet-specific TV features such as:
A MoCA adapter could make services of your smart TV work exactly as it did before. But, you may lose the ability to program your DVR remotely when using your host router. You should still be able to use regular DVR functions in your home.
First things first, unplug the Coaxial cable from your Verizon router and make sure that you are able to access the internet once it is disconnected.
The next step is to power on your computer, open a web browser of your choice, and navigate to 192.168.1.1. This is the default IP address on your Verizon router.
The username and password to sign in to your router can be found in the manual or on the back panel of your device.
Scroll down a little and click Release. Doing so will disconnect your router from the internet.
If the router supports WiFi, you can connect your PC with it wirelessly. But, If you prefer to connect the devices via wired source, insert one end of the cable in your router and other end in to the PC.
That’s it! You are now free to use the internet on your computer without getting fear of the WiFi signals to drop. See, connecting my own router with Verizon FIOS is a piece of cake, isn’t?
These days, we are receiving a number of queries on how to extend the existing WiFi router range to far corners of the house. And, we prefer suggesting our users to opt for TP Link WiFi extender. If you wish to consider our suggestion, the without delay set up TP Link extender and see the difference.
With that, we are now going to wrap up our blog. We really hope that the instructions we have provided above will help you use your existing router for Verizon FIOS easily.
Disclaimer: We at tplinkrepeater.cc provide online support and information for issues with TP Link WiFi devices. However, we are not involved with any particular organization or brand. The use of trademarks, brand names or logos used on the site should be considered only as for reference purpose. We provide run-time assistance to customers who directly approach us.